| Customization: | Available |
|---|---|
| Media: | Water |
| Driving Mode: | Manual |
|
Still deciding? Get samples of US$ 5.3/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
DN100 PN16 Lug Butterfly Valve with Handwheel
Butterfly valves are quarter turn valves ideal for on/off operations as well as modulating flow. This valve is rated for 16 bar non-hazardous fluids and is operated by a hand wheel. Please note that the maximum pressure may deviate based on the medium type so carefully check the datasheet. The nominal diameter is 200 mm (8 inch) and is mounted to your system by an wafer type flange. The Cast iron (GGG40) housing makes it suitable for higher pressure and temperatures then the standard GG25. The GGG40 polyamide coated disc is the standard option The NBR seal allows for a temperature range of 5°C - 85°C.
Adopting Standard List
Technical Parameters:
|
Nominal pressure |
0.6PMa |
1 0MPa |
1.6MPa |
|
Nominal Diameter |
50 ~ 700mm |
50 ~ 700mm |
50 ~ 700mm |
|
Seat test pressure |
0.66MPa |
1.1MPa |
1.76MPa |
|
Shell test pressure |
0.9MPa |
1.5MPa |
2.4MPa |
|
Suitable temperature |
Rubber:-46°C~ 135°C , FPM:≤250°C |
||
|
Suitable medium |
Fresh water,polluted water, sea water,food, all kind of oil, steam,gas, acid, alkali |
||
|
Driving methods |
Worm gear,manual,electric,pneumatic |
||
Material of Main Rarts:
|
Body |
nodular cast iron,cast steel,stainless steel |
|
Seat |
NBR,IIP,CR,EPM,FPM,SR,Fluorine plastic |
|
Disc |
nodular cast iron,cast steel,stainless steel |
|
Shaft |
Steel No45,Chrome allay steel N40,Saielesss seel 213,Sainless seel1Cr13 |
|
Bush |
Cast Alu-Bronze,self-lubrication |
Butterfly valves are similar to ball valves but have more advantages. They are open and close very quickly when actuated pneumatically. The disc is lighter than a ball, and the valves require less structural support than a ball valve of comparable diameter. Butterfly valves are very precise, which makes them advantageous in industrial applications. They are quite reliable and require very little maintenance.
1. Turning on/off easily and rapidly with less force. Having less fluid resistance and can be operated frequently.
2. Simple structure, small size and short face to face dimension, which suitable for large diameter valves.
3. It can be used for transmitting mud, fewer liquids are stored at apertures of pipe.
4. Long service life. Standing the test of tens of thousands of opening/closing operations.
5. Butterfly valves have excellent regulation performance.
6. Small torque. The pressure on discs at the two sides of the spindle is almost equal, causing contrary torque. Thereby, the valves can be opened with less force.
7. Sealing face is generally med of rubber or plastic. So the butterfly valves can be with good sealing under low pressure.
MOQ
We do not have any MOQ for this valve, 1 set order is also can be accepted.
It depends on the order quantity, but not more than 35-40days after received payment
| By sea | LCL shipment |
| Container shipment | |
| By air | By air cargo or courier for sample |
30% deposit, the balance will be paid before loading.
We promise 100% hydraulic testing before exporting, with a testing machine and testing bowl(for big size).
Body testing: 1.5* design pressure
Sealing testing 1.1* design pressure
We can provide a 12-month warranty after the shipping date.
Plywood case in exporting standard, bubble plastic packing inside
For large size, we will use steel pallet with bubble plastic packing outside
Our Overseas Exhibition
FAQ:
1. Yes, sample order is available for quality check and market test.
2. Quality is priority, we always attach the importance to quality control from the beginning to the end of the production.Every product will be fully assembled and carefully tested before painting, packing and shipping.
3. It usually takes about 25-30 working days to produce. For big order, it depends on the order quantity.
4. We usually accept T/T, L/C,and others payment.
5. We offer 12months warranty time.
6. Depends on your request, we have standard models in stock. Some special products and big order will be newly produced according to your order.
7. Yes, different models can be mixed up in one container.
8. Our company has been audited and approved ISO9001and WRAS certificate.
9. OEM & ODM services will be provided by us depend on your requirement.
Or you can visit our website: davanflowtek.en.made-in-china.com
){kind=link}